PE double wall corrugated pipe specifications and selection recommendations

Haili admin
Oct/31/2024
PE double wall corrugated pipe specifications and selection recommendations
PE double wall corrugated pipe specifications and selection suggestions: PE double wall corrugated pipe is a high strength, corrosion resistant pipe widely used in drainage, sewage, rainwater pipes and other fields. Its unique double wall design provides excellent pressure resistance and long-term performance, suitable for municipal engineering, agricultural irrigation and other scenarios. The following are the specifications and selection suggestions of PE double wall corrugated pipes to help you better choose the right pipe.

PE double-wall corrugated pipe is a high-strength, corrosion-resistant pipe widely used in drainage, sewage, rainwater pipes and other fields. Its unique double-wall design provides excellent pressure resistance and long-term performance, and is suitable for municipal engineering, agricultural irrigation and other scenarios. The following are the specifications and selection suggestions of PE double-wall corrugated pipes to help you better choose the right pipe.


The common specifications of PE double-wall corrugated pipes vary according to the pipe diameter, ring stiffness and length

The common specifications are as follows

1. Pipe diameter

The common pipe diameter ranges from 110mm to 1200mm, which is suitable for different flow and discharge requirements.

2. Ring stiffness grade

It is usually divided into two types of ring stiffness, SN4 and SN8, which represent the compressive strength of the pipe. SN4 is suitable for laying under general conditions, while SN8 is suitable for environments with greater external pressure, such as areas with greater traffic loads.

3. Length

The standard length is 6 meters and 9 meters, which is easy to transport and install. Long pipes can reduce joints and enhance sealing.


Selection suggestions for PE double-wall corrugated pipes

1.Pipe diameter selection

Select the appropriate pipe diameter according to the drainage or sewage volume of the project. Small diameter pipes such as 110mm and 160mm are suitable for small drainage systems, while large diameter pipes such as 800mm and above are suitable for large projects such as municipal drainage and sewage treatment.

2. Ring stiffness grade selection

PE double-wall corrugated pipes often have two ring stiffnesses, SN4 and SN8. SN4 is suitable for laying under general soil conditions and is suitable for light load occasions; SN8 is suitable for high load occasions, such as under the road or industrial sewage system, and can withstand greater external pressure.

3. Length selection

According to the laying conditions and installation convenience of the construction site, choose a pipe length of 6 meters or 9 meters. Longer pipes reduce the number of joints, which helps to improve the sealing and stability of the pipe.

4. Corrosion resistance

Choose PE double-wall corrugated pipes with excellent corrosion resistance to ensure that the pipes are not affected by long-term use in harsh chemical environments.

5. Connection method

Use a socket connection method with good sealing to ensure the sealing and anti-leakage ability of the pipeline system.

Reasonable selection of specifications and ring stiffness according to engineering requirements can ensure the smooth progress of the project and achieve the best use effect. If you need to know more or purchase PE double-wall corrugated pipes, you can go to Haili's official website for more information.




Send a Message

If you want to ask anything just fill in the form below and send us.

// News //

Our News

PE Pipe VS PPR Pipes
PE Pipe VS PPR Pipes

11/06/2024

PE pipes are generally less expensive and more flexible, making them ideal for low-pressure applicat...

HDPE Pipe Manufacturers and Purchasing Season
HDPE Pipe Manufacturers and Purchasing Season

11/04/2024

Procurement in advance, reasonable construction arrangements and careful factory selection are the k...

PE double wall corrugated pipe specifications and selection recommendations
PE double wall corrugated pipe specifications and selection recommendations

10/31/2024

PE double wall corrugated pipe specifications and selection suggestions: PE double wall corrugated p...

Haili Pipeline: Focusing on Modern Agricultural Facilities
Haili Pipeline: Focusing on Modern Agricultural Facilities

10/30/2024

Haili Agriculture responds to the national rural revitalization policy and expands the application f...

Design and construction of PVC water supply pipes in water supply projects
Design and construction of PVC water supply pipes in water supply projects

10/29/2024

Design and construction of PVC water supply pipes in water supply projects: In water supply projects...

HDPE Butt Fusion
HDPE Butt Fusion

10/25/2024

HDPE (High-Density Polyethylene) butt fusion is the most common method for joining HDPE pipes, prima...

// Our Products //

New Products

Aluminum Alloy Plastic Lined Composite Pipe
Aluminum Alloy Plastic Lined Composite Pipe

Aluminum alloy lined plastic composite pipe is a new type of practical pipe developed on the basis o...

ABS Water Outlet
ABS Water Outlet

ABS water outlets have become an ideal choice in water supply systems because of their corrosion res...

2 inch plastic water pipe roll
2 inch plastic water pipe roll

A 2-inch plastic water pipe roll refers to a type of flexible tubing made from plastic, typically hi...

PERT Ⅱ Heat Resistant Insulation Pipe
PERT Ⅱ Heat Resistant Insulation Pipe

Polyurethane prefabricated directly buried insulation pipe, full name: high-density polyethylene out...

Underfloor Heating Pipes PERT Pipe
Underfloor Heating Pipes PERT Pipe

Underfloor Heating Pipes in stock at The Underfloor Heating Store. Multifunctional, reliable underfl...

HDPE Cross Pipe Fittings
HDPE Cross Pipe Fittings

To find the Versatility of HDPE Cross Pipe Fittings. Engineered for precise connections, these fitti...

HDPE butt fusion joint fittings
HDPE butt fusion joint fittings

High-Density Polyethylene (HDPE) fittings are components used in piping systems to connect, control,...

PERT Ⅱ Electrofusion Pipe Fitting
PERT Ⅱ Electrofusion Pipe Fitting

Pert-2 fittings represent a cutting-edge solution in the field of plumbing and heating systems. Thes...